Contact

Customer Service:

laseraxe@hotmail.com

  • Black YouTube Icon
  • Black Facebook Icon
  • Black Instagram Icon
  • Black Twitter Icon
  • Black Facebook Icon
  • Black Instagram Icon
  • Black Twitter Icon
  • Black YouTube Icon

Newsletter

© 2014-2018 Laseraxe All rights reserved.

May 16, 2018

CNCC and gcode file

15 comments

I have tested to load a dxf file but the drawing is the same as the original. I have made a gcode file, my question is: it's possible to load this gcode file directly with the CNCC software?

May 18, 2018

Hi Friend:

Yes CNCC anc load the gcode directly

 

May 18, 2018

Thanks for your answer but the button Open is gray and not accessible. I try this but without result.

It's possible to use an other software with this machine like Repetier, Master GRBL....

And have you an answer for the difference between the dxf file and the translate gcode (sorry for my first request : I have tested to load a dxf file but the drawing is "not" the same as the original.)

May 18, 2018

Did you connect the software to the machine successfully, it can not be grey color if you connected sucessfully

May 18, 2018

I connect the machine and I can load the dxf file but I have a message "no graphical output".

When I read the code line, I have just the first line.

 

Dear Leshuots,

 

that error has been discussed in the forum for months but they deleted the previous posts so the answer has been deleted. The error is easy to solve, you just need to put a empty USB and name it as /D: The problem occurs because at the code a temporary file is send in order to generate de gcode from the dxf and it's not able to find the route. I hope they fix this in the next software update.

Jun 2, 2018

Thanks for your help for the dxf file. But, for my second problem, it's possible to work with gcode file directly?

Yes, I've tried it once when i couldn't cut directly from dxf. You can only load a gcode if your machine is conected. I've seen in your photo that it's freeze because of this. You need to autoconect the machine to be able to load it. With dxf you can previsualise it without having the machine connected, but the buttons willl be frezze too.

 

Jun 3, 2018

Hello, when I try to load a gcode file (the machine is connected), I have on the screen two small windows:

- Draw the image

- No graphical output

Have you some explanation ? Have a process to do this operation?

Thanks for your help.

Jun 5, 2018

I have not been able to add in Gcode either Could the admin show us a few steps?.

Jun 19, 2018

Administrator its been 2 weeks can you please participate and show how to add Gcode

thank you.

Jun 21, 2018

The new software version will solve this problem, and it will release in 2 weeks

Jul 8, 2018Edited: Jul 8, 2018

I have not been able to enter GCode in the latest CNCC program. The GCode generated by the CNCC program interprets all lines as XY coordinates as well as circles and arcs; It does not use the GCode for circles or arcs but rather converts to XY positions. The result is that circle cuts can be a bit choppy.

Thus the resulting CNCC GCode is not well optimized and I THINK takes longer to cut.

Jul 20, 2018

When do you think you can send us an ergonomic solution, usable with DXF and Gcode functions and without viruses? Otherwise can you make us a list of software compatible with your system? If there is not, can you give us the information so that we can develop our own interface? Please inform us as soon as possible. JPHM

New Posts