Contact

Customer Service:

laseraxe@hotmail.com

  • Black YouTube Icon
  • Black Facebook Icon
  • Black Instagram Icon
  • Black Twitter Icon
  • Black Facebook Icon
  • Black Instagram Icon
  • Black Twitter Icon
  • Black YouTube Icon

Newsletter

© 2014-2018 Laseraxe All rights reserved.

Jun 5, 2018

Problem firmware

14 comments

Good afternoon, help please, updated the firmware to 1.1f and the machine does not work (((only 1 axis works, maybe give the old firmware file since there was nothing like this on the disk

Jun 5, 2018

check this thread for default settings: CNC software parameter default setting

Jun 6, 2018

Hi Friend, so far it do not support the Grbl 1.1, if you flashed the firmware you can not use the CNCC any more. Due to the commerical secret we can not open the firmware, you need to order a new core board on the web

Dec 22, 2018

If you are using grbl in any part of your base code, you are violating the GNU GPL.

Jul 29, 2018

haha, make the same mistake, i think i buy some fake Machine (15w) because nothing was working. now i order a new Engraving Machine here, and 2 stack mainboards, in case i broke it again :)

hope i get it now.

Oct 5, 2018

Which version of Grbl is supported

Nov 18, 2018

Please help me. i was change fimware by benbox now cant return to CNCC. please share firmware bin file. As a customer i hope for professional resolving problem

Nov 18, 2018

here is your new firmware :) https://www.laseraxe-customize.com/online-store/Laseraxe-USB-CNC-3-Axis-2-Phase-4-Wire-Stepper-Motor-Controller-Driver-Board-CNC-Laser-Engraving-Machine-Mainboard-p105357265 they note on every place don't flush the board, in manual, here in forum, on fb groups, also on cncc software before you flash it. so new board, new game, you can use the old board for other software.

shit happens, i do it also, I would be a liar if I would say that I have not read at least 3 times the warning

Nov 18, 2018

what the hell. why cant share firmware. its not true bussiness i thing. Next question. its possible after changing firmware to benbox my laser in first time was engraving but not the ligth is so week and not engraving. but step motors work normal.

Nov 18, 2018

i use t2laser for my flushed board, works perfect. they have lots of drivers, also one for the laseraxe board.

Nov 18, 2018

yes both

Nov 18, 2018

t2laser is not free(( why my laser light is weak now(( can you give me your skype?

New Posts
  • I have created a GCode file using inkscape and it provides me with the text document with the GCode in it as plain text. When I click on GCode in the CNCC software and try to open the file, CNCC states it is the wrong GCode file type, and to open the correct file type. I have tried saving it as numerous different file types but CNCC will not open it. Am I doing something wrong? is there a correct file type for GCode?
  • Bonjour, j'ai enfin réussi à installer cncc2019 1.25 sous windows 10 et ça fonctionne. MAIS , dans les settings, je ne peux pas mettre mon laser de 15 W la liste déroulante s’arrête à 7W et je ne peux pas écrire dans la case, il faut choisir parmi les valeurs proposées. Y a-t-il une solution ? D'avance merci. Cordialement
  • For some reason when I open a raster image it resized it larger than the file is set for. My image is 3inx2in, I loaded it onto my software but it keeps uploading much larger than intended. Why is that? What can I do differently?