The S5 Max appears to be the successor to the roborock s5 max review, which we tested more than a year ago. However, some new features outperform even the best-of-the-best. S6 Roborock The most important is the addition of a larger electric water tank. With each model, the robot's mopping feature has become more sophisticated. While the S5 had no control about how much water was dispensed during each mopping job, the S6 incorporated a simple switch that allowed you to choose how much water dampened the mopping cloth. Mopping is completely integrated with the S5 Max's other advanced features, and the Mi Home companion app allows for more detailed water control.
Selective room cleaning is now possible on the S5 Max, which was previously only available on the S6. Aside from these enhancements, the Roborock S5 Max retains the majority of the features and design cues from previous versions. This includes LiDAR tracking, 2000Pa suction, zone washing, and voice control with Alexa and Google Assistant.
Setup and usage
All of the brushes are pre-installed on the S5 Max, so all you have to do now is set up the charging dock. The S5 Max boasts roborock s5 max review "Complete Water Shutoff," which means it won't drip when docked, allowing you to keep the mopping module full and ready for the next job. Despite this, it comes with a plastic moisture-collecting tray to position the robot on as it charges. The water tank fits neatly under the dustbin and can be left there until filled with tap water, requiring only the attachment of the cleaning cloth when mopping your hard floors. According to Roborock, the water tank capacity has been doubled to 280ml, which is enough to clean a 2,000-square-foot space.
After that, you'll need to download the Mi Home app and set up or log in to your account. The app guides you through connecting the system to your Wi-Fi network after you've added it. In less than 10 minutes, I had the S5 Max ready to clean. To begin a cleaning job, select your cleaning mode and water level by tapping a button with three squares and a plus sign near the bottom of the app. There are five suction settings ranging from "gentle" to "max," as well as four water settings and a dry-mop option. Then, to take the S5 Max on its way, you press the clean button.
Since the robot is learning the layout of the room and creating a diagram, the first cleaning will take the longest and be the least effective. When it's done, the app shows the area covered by the robot and the route it took across it. As the robot becomes more familiar with the environment, subsequent cleanings become smarter and shorter. You can tell the robot to clean only some parts of the room and stay out of others if you save a room map. The first step is to create zones on the map. Tap the Zone button, then drag and resize the bounding box to the area you want to clean. By pressing the "add" button, you can build multiple zones.
Select No-go Zone and mark certain areas on the map to build virtual barriers. I used the S5 Max to clean my downstairs stage, which includes areas with both carpet and hard floors, as I had done with previous Roborock models. As long as I used the "balanced cleaning mode," it was able to clean the entire area in about 30 minutes on a single charge over time. I tried using a stronger suction, but it depleted the battery faster, forcing the S5 Max to re-dock at least once and lengthening the cleaning time. The extra suction power was really only required in the carpeted living room, and the S5 Max can detect carpeting and increase suction on its own.
I discovered that the mopping results were on par with the Roborock S6. My kitchen floor was washed uniformly, leaving few streaks behind, and with enough pressure to pick up any stains. This was a far cry from the surface sponging that the older roborock s5 max review provided. It won't fully remove the need for stick-mopping, but it will cut down on how much you have to do it. Although I felt comfortable leaving the S5 Max to clean on its own while I hovered nearby doing other stuff, the app does give you some power. You can manually direct the robot's cleaning by using a virtual remote hidden in the settings menu. There's also a scheduling function that allows you to choose a start time and cleaning mode for each day of the week.
The S5 Max stood out as being better able to mop up where its cousin fell short. Attach the cloth cover to the bottom of the vacuum to allow the mop, and it simply snaps into place. You'll also need to fill up the 290 ml water tank in the back, which holds a lot of water. You've been warned not to use detergent or hot water in the tank because both can damage the vacuum. Just make sure you wet the cloth and wring it out before adding the mop so the robot can start mopping right away. At the same time, the S5 Max runs the vacuum attachment and the handles mopping. The vacuum sweeps up and then glides over the same spot with the fabric in the back. We discovered that the S5 Max not only pressed out more water, but it also picked up more dirt. And that's remarkable for smart vacuums, which have a tendency to struggle while mopping. When we go over the area with a wet paper towel, we usually see a lot of dirt left behind. What the S5 Max didn't leave behind impressed us. We refer this to the S5 Max's advanced settings in the roborock s5 max review. There are four different settings to choose from, including low-flow, high-flow, and even a dry mop configuration. This is fantastic, as it allows you to saturate floors with more water in high-traffic areas or where the surface needs more attention. That feature made a difference when mopping our floor, according to what we saw, and made the S5 Max more successful at this role.
Visit our website: https://onepik.com/