What is the right setting to affect the metal?
I have the version CNCC 2.53 and I would like to affect the bone-shaped tags.
The model I have is Hcz laser 10w.
Thanks
Bonjour, j'ai enfin réussi à installer cncc2019 1.25 sous windows 10 et ça fonctionne. MAIS , dans les settings, je ne peux pas mettre mon laser de 15 W la liste déroulante s’arrête à 7W et je ne peux pas écrire dans la case, il faut choisir parmi les valeurs proposées. Y a-t-il une solution ? D'avance merci. Cordialement
Hi Friend:
Sorry that we do not have the 10W type machine, you bought the fake product, as to the parameter setting, you need to test by yourselft
how to know if the product you buy is false or real, the motherboard says laseraxe. and the laser says 15w, and I have not managed to record anything in metal.
This is the link of the product where I make my purchase:
https://es.aliexpress.com/item/DIY-15-W-gran-potencia-grabador-l-ser-de-metal-m-quina-de-corte-del-metal/32833149386.html?spm=a2g0s.9042311.0.0.274263c0tYJlN4
hi，set the power on 100% and speed @ 140 or 120 or 100. you must know you need max set the power and lower the speed.
@Administrator it's correct. I have used the maximum power setting and the lowest possible speed. but I've never had success.
I have done many tests with different metals without success in engraving.
for the above I ask, is the laser false ?, or is it a software or motherboard problem?
or should I buy a 7000mw laser module?
Thanks for the answer ... but
Even if the model does not have the program CNCC 2.53E is there, how do you set it to affect the medals in the shape of a bone?