I just recieved a new laseraxe board that I purchased through this site, I am burning my first project, and it does not seem to burn solid spaces, it is dithering all projects,
please advise
Search
New Posts
- Hello! I have one of the LaserAxe systems (40"x40") and love it, however I recently started having issues with my system. It used to run smoothly but has begun to stutter when operating. It will do about 10 dots of etching then pause for several seconds before continuing. It only just started doing this and is SIGNIFICATLY increasing the time it takes to complete my etchings. I am usually etching leather and need a 51ms burn time at 60-70% power to get the desired result. I disconnected/reconnected every connection, uninstalled/re-installed the drivers, have it running on a dedicated machine with almost no other software programs besides the CNCC V2.53C Laseraxe software. Any ideas how to help? Is my laser just getting old/overused and needs to be replaced? Is there an updated software I should use that would help? Any advice is greatly appreciated
- Handheld Fiber Laser Marking Machine comes standard with a movable laser head for marking of parts in any direction and a 2D worktable for micro adjustment during the marking process. Its control button and worktable are set on the cover of the cabinet to save space. The machine is suitable for large workpiece and long-distance marking.The mark is clear, beautiful, and never disappears. More>> https://www.reaying.com/fiber-laser-marking-machine/handheld-fiber-laser-marking-and-engraving-machine-f20h.html
Additionally all images that I load into the software seem to render much larger with this new board, something that is 50mm in size when I run the range, will easily go 200mm or more, these are images that I have used before with the old board
Hi Mark:
Please check your parameter settings, it should like the this:
https://www.laseraxe-customize.com/forum/cncc-software/cnc-software-parameter-default-setting
Thank you , that was the resolution to my issues