Hi Friend, the Laseraxe just release its new CNCC2019（V1.25d）, here is the download link, same file in Google drive.
Google drive:
https://drive.google.com/open?id=1kqIEiLUlwiuAneTFLSPQ53gEG5kMOi89
if you have any problem during use this this version please post it at here
We upgrade the DXF/DWG module and add new A-axis function, manual alreay updated and will update videos in the next several weeks, below is some photos to show where changed
Nice, the windows are now complete under Windows 10
hi, we have update video about how to cut 3mm plywood with 7w-15w laser head with CNCC2019
https://www.dropbox.com/s/dedw44014zx8bkh/how%20to%20cut%203mm%20plywood%20with%207w-15w%20laser%20head%20with%20CNCC2019.mp4?dl=0
hi, we have update video about how to engraving on stainless steel with 7w-15w laser head with CNCC2019
https://www.dropbox.com/s/jevma8t1vcyz15u/how%20to%20engraving%20on%20stainless%20steel%20with%207w-15w%20laser%20head%20with%20CNCC2019.mp4?dl=0
hi, follow below photo to set in your win10 pc, then will be ok.
@Administrator Hey. I install everything as described. When I get to the ccnc installation, I get a window where I have to fill in country and time etc. If I press OK it disappears and it is done it does not continue. What can this be? Please help !!!
ВСЕ ВЕРСИИ ЭТОЙ ПРОГРАММЫ БИТЫЕ И НЕ ОТКРЫВАЮТ ПОЛНЫЙ ИНТЕРФЕЙС!!!
Пробавал v 2.53 (не гравирует на металле) что делать ?????? как открыть программу CNCC 2019 ПОЛНОСТЬЮ!??
hi, follow below photo to set in your win10 pc, then will be ok.
my program that came with the machine does not work, because it does not fully open the program interface, the control module, please help send a solution to the problem with the new metal cutting program. sessions C 2019 to 1 0, 9 does not work.HELP !!!!!!!!!!!
please check above photos to set in your windows, then will full show the button
for me CNCC2019（V1.09) works now fine on windows 10.
It works fine too for me in Windows10. But Dxf import still gives isues if you don't have a D: partition. It works much more better than previous 2019 versions, good job and keep improving.
for dxf files , you must follow below rules:
Hello
I have to questions please, How can I invert the dirrection of X axis? its is now inverted
And how can I tune the redbox dimmensions to the full 30x40 cm of my 7W laser?
Work area its 300x400 but when I etch a picture of 5cmx5cm it uses altmost 15cmx15cm space
hi, can you make a video and send link to me. thanks
click "state" then "setting", window open, there is working area. add your size in mm, then click save. you cant see the full working area on screen if they to big. (don't ask me why) but if you start the laser, its will print all.
yes, already done that (i.e. work area 300 x 400) but it is not to scale, when I etch the picture it's a lot bigger that the actual dimension on the software.
And how to invert the X axis?
@jcesar.kds why you want invert x axis? its ok before shipping. you cant change it. why you want change the direction?
yes what i told, you cant see full picture, chinese software :) think the X axis you have to change the wiring on the step motors, or maybe in firmware setings, if you make a minus "-" the value for x axis and then save. not sure if this works, i'm on my mac now, cant check it on my windows pc. (but be careful if you change some thing on firmware, i broke my first board like this, overwriting firmware)
OK, sorry I didn't make my self clear, the problem it is not on my screen, in my screen it seems all OK but when the machine works it makes the figure bigger, for example if in my screen I have a perfect circle of 5cmx5cm the laser makes a circle of lets said 16cmx16cm (not exactly)
@jcesar.kds ah, i know your problem. you mean 5cm in screen, but engraving its a lot bigger than 5cm. right? if same as what i told, you need import file as the manual below.
https://www.dropbox.com/sh/lv5o0k74dn4r3bg/AAAjwXyX4lEDI7R3l7tpq_FOa?dl=0
follow the manual to finish the setting and save is ok
@Administrator could you please post it as a google drive file, dropbox isn't working for me. i have the same problem thats been bothering me very badly. Thank you!
check the video, around 4:00 https://www.dropbox.com/s/gqbnpyevmszvwac/how%20to%20use%20CNCC2019.mp4?dl=0 you have to add the right frame you use.
Thank you, I did everything again and seems to work fine I need to do more test. I probably forgot to click on Save
BTW reverse axis and wrong scale are fixed selecting the Square frame setttings. My model is 7W 30x40 frame
Hey Andy would you mind posting a link to this video? The dropbox link doesn't work
for picture size, try to edit the picture example from 144 dpi to 72 dpi, so the picture get 1/2 size smaller. or make it bigger, if the size is to small.
yes, it will get small if you change the dpi
many people say the laseraxe software is not good. but i like the software especially for burn and cut directly from pictures, you don't have to make dxf files first, and burns very quick. The handling of the mouse is a bit complicated and annoying. but since I have flashed a board before, I can use also other software on it.... I am looking forward to the next version and hope they come soon
Hi. My x axis is also reverse. i have followed the manual and videos but cant fix x axis issue. where can change this in CNCC2019 or config file. or how to change wiring on the machine.
I found wrong wiring for the x axis motor. once this fixed the software worked fine
Hi. i have the 15w 100cmx100cm machine. whats the correct settings for this in CNCC2019
When i enter 15w ( 15000 ) the program will not start , has an error message about material
Hi. Can you make CNCC2019 look like cncc2.53c. The functions are all hidden which makes it harder to use. Make functions more available on the screen much easier to find instead of auto hide.
Hi can someone please tell me how to do photo's with laseraxe software everything I try comes out black I can't understand what he is saying on the video's his english is not that good for me to understand thank you
You need to update the CDs you send with your equipment.